High Quality Ceramic Core for Airtex
For air textured yarn of filament
Tight and even loop.
High speed texturing available.
Low air consumption (Energy saving)
Various types of nozzles are available.
High hardness of material(IMC-3) makes
less abrasion and long lifetime of nozzles.
Special nozzles are available on request.
TYPE |
Feeding Denier |
Winding Speed(m/min) |
Denier Per Filament |
Pressure Range |
Effect Yarn Over-feed(%) |
Air Consumption |
T311 |
30~400 |
~650 |
1~2.5 |
8~14 |
~60% |
0.54x(Pe+1) |
T321 |
150~550 |
~650 |
1.5~4.0 |
8~14 |
~70% |
0.81x(Pe+1) |
T341 |
250~1100 |
~500 |
2.5~6.0 |
8~14 |
~80% |
1.46x(Pe+1) |
T351 |
500~3000 |
~500 |
~22 |
8~14 |
~80% |
2.05x(Pe+1) |
Recommended condition
- Range of pressure : 8 ~ 14 bar
- Temperature : 20 ~ 30℃
- Relative humidity : upto 40%
- Maximum residual oil content : 0.1 mg/m3
- No abrasive particles, size under 1㎛, Density under 1mg/m3